Portable Train Horns
Kit de Horngun DIY con control remoto (Universal) - hasta 150db
Kit de Horngun DIY con control remoto (Universal) - hasta 150db
Retiro disponible en Warehouse
Normalmente está listo en 24 horas
Este kit de Horngun de tren incluye un control remoto y un botón de disparo.
También se puede utilizar con otras marcas de taladros sin escobillas.
¡Hazlo con nuestro Kit de Hornguns DIY con 4 Trompetas!
Incluimos todo lo necesario para construir una Horngun inalámbrica extremadamente potente a partir de tu herramienta de impacto. La mayoría de las herramientas de marca se adaptan perfectamente a nuestro compresor y Hornguns para que puedas construirlo tú mismo. De lo contrario, necesitarás ajustar la carcasa.
¿Cómo hacer una Horngun de impacto? Aquí tienes pasos simples:
-
Desatornilla la carcasa de la abrazadera.
-
Retira los engranajes.
-
Quita el motor del taladro.
-
Retira el cableado.
-
Ajusta la carcasa para que se ajuste al compresor de aire.
-
Instala el nuevo cableado.
-
Conecta el compresor de aire a los terminales.
-
Conecta la batería y verifica que el compresor funcione correctamente.
-
Vuelve a atornillar la carcasa.
-
Perfora 2 agujeros para los tornillos desde el lado posterior.
-
Instala el montaje de las Hornguns usando 2 tornillos.
-
Conecta una manguera al compresor y a las Horngun.
-
¡Disfruta de tu nueva Horngun!
Share
Very loud. Great for alerting an emergency
I ordered 2 units of the Dewalt Quad kit with remote and this RED COLOR HORN UPGRADE UNIT is something I really love. Sounds totally loud on Low Tone that can really catch people's attention. It came fast and was packed with total care. THANKS AGAIN BOSS HORN !!!
Everything was of high quality. For a first timer it’s a bit difficult but not that I did it once next time around should be a breeze
When trying to prank my grandson I accidently made him permanently deaf and now he hates me. In all would buy again.
I understand it’s a diy kit, but they send the parts and then say good luck. If you aren’t handy, just spend the money and buy the whole drill and horn already assembled. Otherwise, you will have a bunch of parts you can’t use. It took about two hours to understand the intent of the kit and what you’re supposed to do and to modify the inside of the drill in order to get it to work. In the end, I’m happy with the result but it was a bit of a find your own way experience.
